UPMAX CRANES (SUZHOU) CO., LTD

Professional manufacturer with high quality,competitive price&fast shipment.

Home > Knowledge > Content
Installation method of electric hoist slide-line
- Jun 28, 2018 -

  UPMAX electric hoist electric hoist production of the superior quality, the primary supply of two kinds of ring and chain electric hoist wire rope type, centering production technology, safe and reliable quality guarantee, welcome you to choose.

  Electric hoist is a kind of light and small lifting equipment, which has the characteristics of small volume, light weight, simple operation, convenient operation and so on, and is used in industrial and mining enterprises, storage dock, etc.Of course, special specifications can also be customized.The slide-line of the electric hoist is also important for its length.Equipment information related to slide-line:

1. Multiple devices of electric hoist are in u-shaped track.For this characteristic, we place the steel cable in the middle of the track and the upper part of i-beam.The wire rope is made of 10mm steel wire rope or round steel, and the end is fastened with a basket bolt.

2. The sliding ring is interlocked with two rings and has a certain amount of residual to prevent the wire from scratching the card.The steering ring is bolted with two rings, which can roll freely.

3. One end of a steering ring is put on the steel cable, and the rubber sleeve line is fixed on the lower end of the steering ring after the motor lead is kept.Then, one end of the sliding rings is put on the steel cable, and the rubber sleeve line is fixed in sections at the lower end of the sliding ring.The front end is connected with the motor, which can roll freely.The back end is connected to the power supply.

4. Under the traction of the motor, take the steering ring as the center, and pull the steel rope for linear or circular motion.

5. The above method can also be used for direct orbit.